Skip to content

Bathtub Refinishing in Athens, Winder & Northeast Georgia

We refinish stained, chipped or dull tubs without pulling them out.

Updated · Reviewed by Sergey Maidanik

from$395

The same cast iron bathtub after refinishing in glossy white
Yellowed, stained cast iron bathtub before refinishing
BeforeAfter

Real job · yellowed cast iron tub refinished

Signs you need it

  • Yellowing or dull enamel
  • Rough, porous finish
  • Bath-mat stains and rings
  • Chips with rust around them
  • Dated color

How we do it

  1. 1

    Deep clean & strip

  2. 2

    Etch & bond primer

  3. 3

    Spray multiple coats

  4. 4

    Cure & caulk

From $395

Starting price. We'll check your photos and confirm what the job needs.

Get Instant Price
  • Full clean and degrease
  • Minor chip and rust repair
  • Bonding primer + multi-coat topcoat in standard white
  • Masking and ventilation of the bathroom
  • Care guide and photo report
  • 5-year written warranty

More details

About bathtub refinishing

We clean and prep the surface, remove failing coating if needed, repair the damage and spray a fresh finish. Plan on 24 to 48 hours before bathing again.

Materials: Cast iron, enameled steel, acrylic

  • Yellowing or dull enamel. Decades of hard water and cleaners wear the glaze thin until it never looks clean, no matter how hard you scrub.
  • Rough, porous finish. If the bottom feels like fine sandpaper, the original gloss is gone and dirt now soaks into the surface.
  • Bath-mat stains and rings. Suction-cup mats trap water and leave permanent dark circles and patches on the tub floor.
  • Chips with rust around them. On cast iron and steel, a chip exposes bare metal that rusts and spreads under the enamel if left alone.
  • Dated color. Almond, bone or pastel tubs that clash with an otherwise updated bathroom.

Our full process

  1. 1.

    Inspect & protect

    We check chips, rust and old coating, protect nearby surfaces and set up exhaust ventilation.

  2. 2.

    Deep clean & strip

    We remove soap scum, oils and silicone. Failing old coating comes off with methylene-chloride-free products.

  3. 3.

    Repair chips & rust

    We remove surface rust, fill chips and sand the repairs level.

  4. 4.

    Etch & bond primer

    We prepare enamel for bonding and scuff acrylic, then apply the right primer.

  5. 5.

    Spray multiple coats

    We spray several coats for an even gloss in your chosen color.

  6. 6.

    Cure & caulk

    Wait 24 to 48 hours for cure. We can replace the caulk line as part of the job.

  7. 7.

    Photo report

    We send job photos, written care instructions and your warranty.

What can change the price

  • Tub size and type (standard alcove vs. garden or corner tub)
  • Number and depth of chips or rust spots
  • Previous coatings that must be stripped
  • Color change or custom color matching
  • Add-ons: new caulk line, slip-resistant bottom, drain/overflow touch-up

Refinish vs. replace

Bathtub Refinishing versus replacement (typical figures)
FactorRefinishingReplacement
Typical costFrom $395$3,000–$8,000+ installed
Time1 visit (3–5 hrs)1–3 weeks
Tile & plumbingUntouchedSurround tile and plumbing often torn out
Tub use24–48 hoursOut of service until the remodel ends

Cast iron tubs especially are worth saving. They are heavy, expensive and hard to remove, and refinishing keeps the tub you already have.

Bathtub Refinishing FAQ

Can you refinish a cast iron tub?

Yes. A solid cast iron tub is often worth keeping. We repair surface chips and rust, then bond a new finish to the prepared enamel.

Will the new white match my toilet and sink?

Whites vary, so send a room photo. We can suggest a bright or softer white that works with the fixtures you already have.

Can you add a slip-resistant bottom?

Yes, a textured bottom is an option to discuss before we spray. It adds grip, but any wet tub still needs care.

Can I use bath mats with suction cups afterward?

Don't use suction-cup or rubber bath mats. They trap moisture and can pull the finish loose. Ask us about a slip-resistant bottom instead.

How long will a refinished bathtub last?

Usually 10 to 15 years with good care. Use gentle liquid cleaners, fix drips and keep the caulk in good shape. Our written warranty lasts 5 years.

Do you refinish acrylic tubs too?

Yes, if the tub is solid. We scuff the acrylic and use a bonding primer suited to plastic before spraying.

See your bathtub refinishing price from a photo

Send a photo for an estimate. We'll check it and text your exact price within 24 hours.